Steel strips

Spring band steel – stainless(X10CrNi18-8)

Quality according to DIN EN 10151
Tolerances according to DIN EN 10258
Dimensions : Width: 1,0 to 300,0 mm Thickness: 0,025 to 3,00 mm
Product: strips and blanks
Edges: cut or rounded
Tensile strength (Rm): 1100 to 1900 N/mm2
Thickness of: 0,50 mm or higher
Length: 2000mm

Other dimensions and tensile strengths on request.

Cold rolled and tempered spring band steel as strips or blanks
(C67S+QT; C75S+QT; C85S+QT; C100S+QT)

Quality according to DIN EN 10132-4
Tolerances according to DIN EN 10140
Dimensions: Width: 1,0 to 300,0 mm Thickness: 0,01 to 3,00 mm
Product: strips and blanks
Edges: cut or rounded
Tensile strength (Rm): 1100 to 2000 N/mm2
Thickness of: 0,50 mm or higher
Length: 2000mm
Surface: flat, polished

Other dimensions and tensile strengths on request.

Spring band steel – untempered
(C55S+LC; C67S+LC; C75S+LC; C85S+LC; C100S+LC)

Quality according to DIN EN 10132-4
Tolerances according to DIN EN 10140
Dimensions: Width: 1,0 to 300,0 mm Thickness: 0,01 to 3,00 mm
Product: strips and blanks
Edges: cut or rounded
Tensile strength (Rm): 490 - 800 N/mm2
Thickness of: 0,50 mm or higher
Length: 2000mm
Surface: flat, bright

Other dimensions and tensile strengths on request.

Thin and cold rolled strips

Quality according to DC01(EN10139/EN100130); St12, St13, St14(DIN 1623/1983); St2, St3, St4(DIN 1624/1995)
Tolerances according to DIN 1544 / 1985
Dimensions: Width: 4,00 mm to 250,00 mm Thickness: 0,07mm ... 1,50mm
Surface: O4 - lustre or mate and slightly oiled (or not oiled)

Other dimensions on request.