Product description
Titanium Grade 1-4 is pure Titanium, the other grades are alloys. Pure Titanium is used due to it’s high corrosion resistance, the alloys because of the extremely high strength to weight ratio.
We can deliver products of titanium and titanium alloys in the form of wire, strips, plates, bars, tubes, cathode, anode, forgings and pipe fittings (fittings,flanges).
Grade 1 Pure Titanium, relatively low strength and high ducility. Typical application plate heat exchangers,anode,cathode,medical implants/devices, surgical instruments.
Grade 2 The pure titanium most used. The best combination of strength, ducility and weldability. Piping systems,anode,cathode,chemical processing equipment,medical implants/devices, surgical instruments,sports equipment.
Grade 3 High strength Titanium, used for Matrix-plates in shell and tube heat exchangers.
Grade 5 The most manufactured titanium alloy. Exceedingly high strength. High heat resistance. Aerospace, subsea.
Grade 7 Superior corrosion resistance in reducing and oxiding enviroments. Chemical Industry.
Grade 9 Very high strength and corrosion resistance. Hydraulic piping, subsea.
Grade 11 Applications as for gr 7. Suitable for deep drawing.
Grade 12 Better heat resistance than pure Titanium. Applications as for grade 7 and 11. Shell and tube heat exchangers.
Grade 19 Titanium Beta C is used in high strength applications, applications requiring more strength than TI Grade 5 Titanium.It offers good resistance to stress and corrosion.Aplication in automotive industry
Grade 23 is also known as Ti-6AL-4V-ELI or simply Ti 6-4 ELI. ELI is short for “Extra Low Interstitials”. Grade 23 is very similar to Grade 5 except Grade 23 has lower oxygen, nitrogen and iron. The lower interstitials provide more ductility and better fracture toughness (slightly less strength) than Grade 5.
Scope of supply for Titanium & Titanium Alloys
| Wire | Strip | Plates | Tubes | Fittings | Flanges | Forgings | Welding wire | |
| Grade 1 | * | * | * | * | * | * | ||
| Grade 2 | * | * | * | * | * | * | * | * |
| Grade 4 | * | * | * | * | * | |||
| Grade 5 (Ti 6Al 4V) | * | * | * | * | * | * | ||
| Grade 6 (Ti 5Al 2.5Sn) | * | * | * | * | ||||
| Grade 7 | * | * | * | * | * | * | * | |
| Grade 9 (Ti 3Al 2.5V) | * | * | * | * | * | |||
| Grade 19 (Beta C) | * | * | * | * | ||||
| Grade 23(Ti 6Al 4V ELI) | * | * | * | * | * | * | ||
| Ti 6Al 2Sn 4Zr 2Mo | * | * | * | * | ||||
| Ti 6Al 6V 2Sn | * | * | * | * | ||||
| Ti 10V 2Fe 3Al | * | * | ||||||
| Ti 8Al 1Mo 1V | * | * | ||||||
| Ti 6Al 2Sn 4Zr 6Mo | * | * |
| Quality | G1 | G2 | G4 | G5 | G7 | G9 | G11 | G12 | G19 | G23 | |
| Analysis % | Fe max | 0,20 | 0,30 | 0,50 | 0,40 | 0,30 | 0,25 | 0,20 | 0,30 | 0,30 | 0,25 |
| O max | 0,18 | 0,25 | 0,40 | 0,20 | 0,25 | 0,15 | 0,18 | 0,25 | 0,12 | 0,30 | |
| N max | 0,03 | 0,03 | 0,05 | 0,05 | 0,03 | 0,02 | 0,03 | 0,03 | 0,03 | ||
| C max | 0,10 | 0,10 | 0,10 | 0,10 | 0,10 | 0,10 | 0,10 | 0,10 | 0,05 | 0,08 | |
| H max | 0,015 | 0,015 | 0,015 | 0,015 | 0,015 | 0,015 | 0,015 | 0,015 | 0,02 | 0,125 | |
| Pd | 0,12-0,25 | 0,12-0,25 | 0,04-0,08 | ||||||||
| Al | 5,50-6,70 | 2,50-3,50 | 3,00-4,00 | 6,50-6,50 | |||||||
| V | 3,50-4,50 | 2,00-3,00 | 7,50-8,50 | 3,50-4,50 | |||||||
| Zr | 3,50-,4,50 | ||||||||||
| Cr | 5,50-6,50 | ||||||||||
| Mo | 0,20-0,40 | 3,50-4,50 | |||||||||
| Ni | 0,60-0,90 | ||||||||||
| Yiled point MPa | Rp02 | 170-310 | 275-450 | 483-655 | 828- | 275-450 | 483- | 170-310 | 345- | ||
| Tensile strength N/mm2 | Vickers | 140 | 170 | 310 | 330 | 170 | 250 | 140 | 170 | ||
| Elongation | 5xd | 24 | 20 | 15 | 10 | 20 | 15-17 | 24 | 18 |